For screen reader problems with this website, please call877-268-81788 7 7 2 6 8 8 1 7 8Standard carrier rates apply to texts.

Crestron® Ethernet to DMX Converter


Model #:

DIN-SACN-DMX

Model #: DIN-SACN-DMX
173227
Crestron
$99,999.00

At a Glance

Product Dimensions 4.21"h x 2.71"w x 2.24"d

Crestron® Ethernet to DMX Converter with an easy web browser based setup and firmware updateRead More

Call for Best Price

Get to know this product.

Product Overview

Product Overview

Simplifies integration between a Crestron® 3-Series® lighting control system and any DMX lighting fixture or controller. Enables distribution of DMX over Ethernet or Wi-Fi® via sACN, Art-Net, or ESP.

The ENTTEC DIN-ODE POE Mk2 (sold by Crestron® as model DIN-SACN-DMX) is a cost-effective and reliable Ethernet to DMX convertor. It supports sACN, Art-Net, and ESP protocols, and is designed to enable integration between DMX and network controllable lighting devices and systems. As part of a Crestron architectural lighting system, it allows a 3-Series® control processor to communicate via sACN with any DMX lighting fixture or controller.

Key Features

  • Converts between DMX512A and sACN, Art-Net, or ESP protocols
  • Enables distribution of DMX over Ethernet or Wi-Fi®
  • Enables Crestron® control of DMX lighting fixtures and systems
  • Supports a single universe Ethernet to DMX node in output mode
  • Supports a single universe DMX to Ethernet node in input mode
  • Supports broadcast or unicast (unicast in input mode only)
  • Supports HTP/LTP merging of up to 2 DMX sources (output mode only)
  • Supports RDM over Art-Net
  • Easy web browser based setup and firmware update
  • 4U 35 mm DIN rail mountable
  • PoE or 7-24 Volt DC powered (power supply not included
Useful Documents
Specifications

General Specs

Depth (in.)2.24
Width (in.)2.71
Height (in.)4.21
Product Weight (lbs.)0.46
WarningProposition 65 Warning for California Residents