For screen reader problems with this website, please call877-268-81788 7 7 2 6 8 8 1 7 8Standard carrier rates apply to texts.
Crestron® Green Light® Dimmer Expansion Module with forward phase dimming and emergency lighting control
|Product Weight (lbs.)
Call for Best Price
An advanced single-channel dimmer module controlled by DALI®. Supports dimmable LED, incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent lighting loads. UL® 924 listed for emergency lighting control applications.
The Crestron Green Light® GL-EXP Series delivers a family of professional lighting control modules for Cresnet® or DALI® based lighting systems. Designed for easy installation on a wall or above a suspended ceiling, these modules offer a perfect solution for adding extra lighting zones to any system without requiring an additional lighting cabinet.The GL-EXP-DIM-DALI is a single-channel dimmer expansion module designed to control LED, incandescent, magnetic low-voltage, neon/cold cathode, or 2-wire dimmable fluorescent lighting loads. Utilizing proprietary zero-cross filter technology, the GL-EXP-DIM-DALI compensates for line voltage and frequency fluctuations, providing superior immunity to power line noise and a dramatic reduction in lamp flicker.
The GL-EXP-DIM-DALI employs forward phase (leading edge) dimming to handle inductive load types like magnetic low-voltage and neon, as well as incandescent, LED, and 2-wire fluorescent.
The GL-EXP-DIM-DALI communicates using the DALI (Digital Addressable Lighting Interface) standard, which enables interoperability with other DALI compliant lighting control products from Crestron and other manufacturers. Interfacing a network of DALI dimmers and other devices with a Crestron lighting control system is facilitated using the DIN-DALI-2 (sold separately).
The GL-EXP-DIM-DALI is UL® 924 listed for use in controlling an emergency lighting load. In the event of a power failure indicated by a loss of DALI network communication (system failure), the GL-EXP-DIM-DALI turns on the lighting load if it is off (assuming line power is supplied by a backup power source). The system failure dimming level can be preset to any value when commissioning the lighting system, so even if the load is already on prior to a power failure, it will change to the preset level when a system failure is detected.
The GL-EXP-DIM-DALI is designed to be mounted to a vertical surface and is UL 2043 compliant to allow for installation in an environmental air-handling space above a suspended ceiling. Conduit knockouts are provided on the bottom and lower sides of the unit. All connections are made via screw terminals behind the front cover.
Single-channel lighting dimmer
DALI® system interface
Supports dimmable LED, incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent lighting loads
Rated 16 Amps at 100-277 Volts AC
Forward phase dimming
Zero-cross filter technology for reduced lamp flicker
Extreme stability under noisy power line conditions
Built-in air gap relay
UL® 924 listed for emergency lighting control
Surface mountable NEMA Type 1 enclosure
Mounts on a wall panel or above a suspended ceiling
UL 2043 listed for installation in an environmental air handling space
|Product Weight (lbs.)