For screen reader problems with this website, please call877-268-81788 7 7 2 6 8 8 1 7 8Standard carrier rates apply to texts.
Crestron®Wireless Lighting and Fan Controller with short circuit protection and reverse-phase dimming
|Product Weight (lbs.)
Call for Best Price
Settable 3-speed fan control and a full range of incandescent and electronic low-voltage dimming control for ceiling fans with attached lighting. Built with the ultra-reliable infiNET EX® wireless communications technology.Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
Wirelessly control ceiling fans and lighting loads by adding the CLC-FANDELVEX to any Crestron® control system. The CLC-FANDELVEX provides fan speed control and a full range of incandescent and electronic low-voltage dimming for the light attached to the fixture. Through programming, the device has three custom-selectable fan speed settings as well as power off. Discreetly mounted within the fan canopy, the CLC-FANDELVEX can be installed into new or retrofit applications without necessitating any rewiring. Built with the ultra-reliable infiNET EX® wireless communications technology, the CLC-FANDELVEX seamlessly integrates with any Crestron control system for a complete, elegant whole-home automation solution.
Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.
The CLC-FANDELVEX communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-GWEXER, DIN-AP3MEX, or MC3). Up to 100 infiNET EX devices may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths. Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves.
Built-in short circuit protection prevents failure caused by excessive loading or improper wiring.
Lighting load and motor controller for ceiling fans with attached lighting
Full-range dimming control for incandescent or electronic low-voltage lighting
Three fan speed settings and off
Provides reverse-phase dimming
No rewiring required for retrofit applications
Built-in infiNET EX® wireless communications
Fan canopy installation
|Product Weight (lbs.)